Zahara - new pattern

I'd like you to meet Zahara. She's a sweet knitted camel, complete with underbite, knobby knees and a gentle disposition.



This pattern is suitable for someone who can knit in the round on double pointed needles. Other skills required are increasing and decreasing, knitting short rows, picking up stitches, grafting and seaming.

To make your very own Zahara, you’ll need less than 100 grams of worsted weight wool. I used Patons Classic Wool in "Sesame".

As usual, the pattern is available through my Etsy shop and as a Ravelry download.



This link will redirect you to Paypal through Ravelry's shopping basket.

Coming Soon to a desert near you...

I'm almost finished tweeking a new pattern. B has been bugging me for a while to make a camel. She's named it Zahara...



And since we're on the topic of camels, maybe you can help me? Do you know the song "Alice the Camel"? It's one of those count down songs that goes like this:

Alice the camel has 5 humps,
Alice the camel has 5 humps,
Alice the camel has 5 humps,
Go, Alice, Go,
Boom, Boom, Boom...

Alice the camel has 4 humps,
Alice the camel has 4 humps...
etc,

until the end...

... Alice the camel has no hump,
Alice is a horse.

Now B says the song is supposed to be about Sally the Camel. Which way did you learn it?

New Pattern - Cyclopsish

Quite some time ago, I blogged about a little cyclops I was working on. I guess he needed time to grow on me before I finished up his pattern, but here he is!




This pattern is suitable for someone who can knit on double pointed needles. Other skills required are increasing and decreasing, making I-cord, and seaming.

To make your very own Cyclops, you’ll need less than 50 grams of worsted weight wool, and some oddments of worsted weight wool for the legs and feet. I used Wool of the Andes in Avocado, Tulip & Orange, and Williamsburg(blue).

As usual, the pattern is available through my Etsy shop and as a Ravelry download.



This link will redirect you to Paypal through Ravelry's shopping basket.



Cedric and Simon looking cyclopsish!

Generic Mittens - pattern is up!

We've had a fun and crazy weekend. Both M & B competed in the James Bay Interclub Figure Skating Competition. They did well! Both received bronze medals in their free skates and B also came 4th and 7th in spins and elements. Our club (due to our awesome and amazing coach) came in first in the competition. We had the highest point standings!

But all this fun prevented much knitting. I have finished preparing the pdf for the Generic Mittens.

download now

There are two files to download. One is the blog posts in full rambling mode and the other is a pattern that summarizes the ramblings. Enjoy!

Generic Mittens: The Thumb

I can't wait to finish these mittens - I love them so much I want to wear them now! I've finished one thumb and just have the other one to go. I had said to my dd that I only had one more thumb to finish. "How many thumbs have you knit?" she asked.

step one: how many sts
Remeber your calculation for Thumb Gusset Sts from step 3 of "Generic Mittens: from Wrist to Thumb"? I had 18 sts - you might have an odd number. Add two to this number - these are the sts on the outside of your markers. Now add two more - these are the sts you'll be picking up. That would bring me to 22. Sometimes I pick up more sts if I feel the gap looks too big - maybe 4 sts, like I did this time. I had planned to decrease back down to 22 sts for the thumb, but I forgot.

If you're doing the other kind of thumb, the one without the thumb gusset, you'll need to refer back to your calculations too. Pick up an equal amount of sts as you have on your stitch holder. You might also like to pick up an extra sts on each "end" to help close any gaps that may form there.

step two: transfer sts from stitch holder
I put 8 sts on each of 2 needles and 4 on the last of the three dpns. I picked up 4 sts and put them on the needle too.

For either type of thumb, once you've transferred your sts from the holder to your needles and picked up the required number of sts, you'll knit even until your thumb is long enough.

Here's my thumb sts ready for knitting

step three: start knitting the thumb
I usually start knitting my thumb at the top left point (see photo above), starting with the sts I picked up. This time I didn't trust myself to get the st pattern right if I started there, so I started at the bottom point, where I could read the pattern from the previous rows. Knit in your chosen pattern until the thumb length equals Measurement #6: Thumb Length from "Generic Mittens: Getting Started". If you're knitting for yourself, you can also just try the mitten on at this point and stop knitting when your knitted thumb is as long as your flesh-and-blood thumb.

step four: decreasing the thumb tip
Do a round of k2tog. Then break your yarn, thread the end onto a darning needle and pass the tail through each of the remaining sts. Pull tight, draw tail to the inside of the work and secure the end. Depending on your pattern you may need to adapt this decrease row. For my mitten pattern, I needed to do the decrease row using my CC, so I ended up having a MC patterned row as my final row. Other patterns might require you to (k3tog, k1) instead of k2tog around. Do what looks best!

step 5: finishing
Weave in and trim all your ends - in my case there are 232 ends to weave in. It may take me a while. Block your mittens if you'd like to, or if you're like me and have problems waiting, wear them immediately!


I may do that even before I weave in all the ends. I'm trying to convince myself they are just like thrummed mittens this way.

Generic Mitten: Decreasing the Top

There are two different ways I typically decrease for my mitten top - depending on which way works best with the pattern I'm using.

Side Decreases
Sometimes I decrease only on the sides of the mitten: decreasing 4 sts for each decrease round. This is my personal favorite: and my friend's mom recently asked me "Why do you do it that way?" She thought it was quite different. Me, I love how it looks! Please feel free to do the decreases for the top of your mitten in whatever manner makes you happy!

Evenly Distributed Decreases
These decreases can be either stacked to make a nice swirling line from the beginning of the decreases to your mitten tip, or staggered to be less visible (apparently, my friend's mom's approach!). If you're planning on using this decrease, knit another 0.5 inches in pattern before beginning your decreases.


Here's my mittens with the Thumb-to-Pinkie-Tip portion and the top decreases finished.

Side Decreases
step 1: where to decrease
I like to have a column of four sts starting when my decreases do and running up to the top of the mitten. It looks nice with a 2sts column too, and that's actually what I'm doing with my sample mitten, since that works better with the stitch pattern. You won't be able to get a column smaller than 2 sts, since it's the left and right leaning decreases that help to define the column. I'd strongly suggest placing a marker at the halfway point. When I don't - I always mess up and have to rip back. So you'll decrease somewhere near the start of your round, twice near the middle of your round and once near the end. The exact place, depends on how many sts you'd like running up the side of the top.

step 2: do it!
This will make a 4sts column
Round 1: *k1, ssk, knit to 3 before marker, k2tog, k1* repeat once more
Round 2: knit
repeat these two rounds until you have half of your original sts. For my sample that would be 54 / 2 = 27 sts. In order to bind-off using a three-needle bind-off or to close the mitten tip by grafting you will need to have an even number of sts. I've decided to go with 30 sts: 15 sts on each needle. And I used a three-needle bind-off.

I'm quite happy that I ended up with 30 sts. Usually I'd get 31 or something, indicating that I'd missed a decrease somewhere. It's probably good you couldn't see me grinning to myself just after I'd finished counting - you might have thought I was just a bit too easily amused!

Even Decreases
step 1: where to decrease
I usually use 6 sts per round for this type of decrease. If you'd like to have a more rapidly decreasing mitten top, throw in a few more per round. Divide your total number of sts by 6: in my case 54 / 6 = 9. This means that I should place a marker every 9 sts on the last round of knitting before the decreases. I should tell you, I don't normally do this. I can usually tell where to place the decreases without placing markers. You know yourself best, put markers in if needed.

step 2: do it!
This will make nicely stacked decreases. For staggered decreases, follow the instructions in the [] as well.
Round 1: *k7, k2tog* repeat from * to * the end of the round
Round 2 and all following even rows: knit
Round 3: [k3, k2tog] *k6, k2tog* repeat from * to * the end of the round [k3]
Round 5: *k5, k2tog* repeat from * to * the end of the round
Round 7: [k2, k2tog] *k4, k2tog* repeat from * to * the end of the round [k2]
Round 9: *k3, k2tog* repeat from * to * the end of the round
Round 11: [k1, k2tog] *k2, k2tog* repeat from * to * the end of the round [k1]
Round 13: *k1, k2tog* repeat from * to * the end of the round
Round 14: k2tog around

Break yarn, leaving tail long enough to thread onto a darning needle. Pass the needle through each of the remaining sts and pull tight. Secure end and trim.

Next: "Generic Mittens: The Thumb."

We're on the homestretch! I hadn't realized when I started these mittens how long this stitch pattern would take. I can normally zap off a pair of worsted weight mittens in 2 or 3 nights. It's a good thing I'm completely in love with this pair or I might have given up and started a worsted weight pair just to finish the tutorial!

Generic Mitten: From Thumb to Pinkie Tip

Ok! So here are my mitts with the thumb stitches snuggled onto a stitch holder. You may notice that I've knit a few rows past the thumb sts already.





From "Thumb to Pinkie Tip" is most likely the easiest part of the mitten, depending of course, on whether the stitch pattern you are using is simpler than the ribbing you chose for your cuff.

step 1: count your sts
You should have the same amount of sts that you calculated you'd need for your hand diameter. If it's off by a stitch or 2 this may be ok. If your stitch pattern needs a certain amount of sts, or if you're using super bulky yarn and a single stitch might make your mitten 1/2 inch smaller, you might want to consider increasing for the needed sts evenly across the first row after the thumb sts have been set aside.

I counted mine: I have 54 on the left mitten. I needed 54 - this makes me quite happy as that rarely happens. Sometimes I rip back to where I messed up, sometimes I just leave it. Like on the right mitten. I have 52. I fudged it a bit. I think it will work out ok.

step 2: knit happily
Carry on knitting in your chosen pattern until your mitten Measurement #5 (Hand Length) from "Generic Mittens: Getting Started" equals the length of your mitten when measured from the end of the ribbing.

And that's all there is, there isn't anymore! (kudos to anyone who knows what book that's quoted from!)

I'm off to bake a cake for M's birthday and get ready for his party this weekend. "Generic Mitten: Decreasing the Top" will hopefully be posted early next week.

Generic Mittens - From Wrist to Thumb

Before the instruction for the mitten from wrist to thumb, I wanted to respond to one of the comments from the previous Generic Mitten post.

Felicity from the comments said:

What little bit of the colour pattern you had done looks really pretty, and I'm really looking forward to seeing more since I can't stand doing colour work myself.

Thanks, Felicity, and I'd really encourage anyone to try this pattern as it's not really colorwork! It's kind of a cheat. You do one round in pattern with your main neutral color and then purl a complete round with your color. The patterned row makes it look like you've actually been doing fancy color work - when you haven't. Each row only used one color! If you use a solid and a handpainted yarn, the effect can look quite intricate.

Now onto the mitten...

step 1: what kind of thumb
I know of three. Feel free to chime in if you know of others - I love learning new things. There's the thumb with a gusset kind of thumb, and the thumb that just sticks out of the mitten. With both of these, when you get to the part where the thumb stitches are, you put the sts on a holder and cast new sts on to replace them. Later you go back and knit the sts on the holder and some new stitches that you pick up in the same place as the cast on sts. The third kind is an after thought thumb. You knit your mitten happily until it's time to decrease and close the top. Then you decide where to put your thumb. You snip the yarn in the centre of that spot, carefully unravel just the right amount of sts for the thumb, place them onto some needles and knit to your thumbs size. I like making a thumb gusset - I find the mittens just fit me better that way. I do have some that have the other kind of thumb, too - they are my Bayerische mittens and I just couldn't figure out how to make the thumb gusset blend nicely with Eunny's beautiful cables so I didn't make a gusset.

But before we go on from Wrist to Thumb, we need to know what kind you want to make. I'm making one with gussets, but I'll give instructions for both.

step 2: setting up for the thumb gusset
This might be a good place to discuss a phenomenon known as finger claustrophobia. I believe Grumperina coined the term and I agree whole heartedly with her that mittens should be just right. I think this may vary for each person. I usually get the right amount of stitches for my fingers when I'm working in stockinette if I stick to my hand diameter measurement. But if I'm doing something with lots of ribbing, or cables I might add 0.5 to 1.0 inches worth of stitches to ensure my fingers don't feel cramped. For the pattern I'm using for this tutorial, I'm not adding any sts. Feel free to add some (or not) to yours!

I'll assume you've already increased, if needed, (or in the case of my mitten, decreased) to the right amount of stitches for your hand.

If you're making the gusset-less mittens, you can skip this step and just knit happily along in your chosed pattern instead.

For the Right mitten
Round 1: Knit 4, pm, m1, pm, knit to the end of the round. The sts between the markers will be the thumb gusset sts.
Round 2: Knit
Round 3: Knit to the marker, slip marker, m1, k1, m1, knit to the end of the round.
(For the left mitten, round 1 would look like this:
Round 1: knit to the last 4 sts, pm, m1, pm, knit 4)

I find with kids' mittens, it's best to make your thumb gusset increases every second round. For adults, I increase every third round. For this stitch pattern, I'm increasing every 6th round, since the row gauge is quite tight.

step 3: knitting the thumb gusset
Continue knitting your mitten hand in pattern, increasing for the thumb gusset on the inside of the markers when it's appropriate for the size and gauge of mitten you're making. If you wish to include your thumb gusset in the pattern you might have to fiddle with things a bit. For the stitch pattern I'm using, I've found that it's best to have an even number of sts between the markers, so I omitted the m1 in Round 1 above.

If you're making the other kind of thumb, continue knitting happily along in pattern

Remember your measurements from "Generic Mittens: Getting Started"? Look back at Measurement 4: thumb diameter and Measurement 3: wrist to thumb.

Calculate the number of sts you would need to make your thumb diameter + plus a bit for comfort - I'm adding 0.25 inches:

________________x____________=__________________
Thumb diameter_______sts/inch_______thumb gusset sts


For my mitten:
(2.5 + 0.25)inches x 6.5sts/inch = 17.875, so 18sts.

This works well for me, since I want an even number of sts between my markers. When I make a plain mitten, I'd likely round this down to 17. Figure out the number of gusset sts you need and then meet me at step 4.

step 4: setting aside the thumb sts
Once you have the right amount of sts between your markers for your thumb gusset, measure the length of your work from the end of the ribbing. You are aiming to get Measurement 3: wrist to thumb. If it's way too long, unfortunately you'll need to rip back and increase for your thumb gusset more frequently. If it's too short, that's ok - continue knitting without increasing until you have the right measurement.

If you're making a mitten without the gussets, simply knit until the distance from the ribbing equals this measurement.

Get a stitch holder, or a waste piece of yarn ready. Knit to one sts before your first marker, transfer one st on either side of the gusset and the gusset sts to a stitch holder or onto a waste piece of yarn. Using the knitted cast-on, cast on 2 sts to replace the ones that were on the outside of the markers. Continue knitting in pattern to the end of the round.

If you're making a gusset-less mitten:
For the right mitten
Knit 4, slip half the stitches needed for your thumb onto a stith holder or waste piece of yarn. Using a knitted cast-on, cast-on the same number of sts. Knit to the end of the round.

For the left mitten
First a little math: 1/2 thumb sts + 4 = _____. In my case that number would be 9+4 = 13
Knit until that number of sts remian, slip half the stitches needed for your thumb onto a stitch holder or waste piece of yarn. Using a knitted cast-on, cast-on the same number of sts. Knit 4.

Once I have both my mittens to this point, I'll post the next installment of this tutorial, "Generic Mittens: From Thumb to Pinkie Tip"


Oopsies (added Jan 21/10)
Just a little blip here! I had thought to add this bit of info to the decreases for the top, but realized it's needed here.

Depending on the type of top decrease I'm planning for my mitten, I'll sometimes make the left and right mitten identical - I like to call them ambidextrous mittens. Other times, I need to make sure the thumb of the mitten lays just to the inside of the palm, rather than sticking out to the side. To accomplish this, I'll knit a certain amount of stitches before beginning my thumb gusset. For the right mitten, I knit this amount at the beginning of the row; for the left, at the end of the row.

In step 2 where it says "knit 4..." and then for the left mitten "... knit 4", these 4 sts are the magic number for my typical worsted weight mitten. If you're using a heavier or lighter yarn, you'll need to decrease or increase this amount a bit - approximately 3/4 of an inch's worth of sts.

Generic Mittens - The Cuff

My gauge swatch is done. And yes I cheated a bit. I don't have quite 4 inches wide and 4 inches long. It's more like 4 x 2.5. But it's my swatch and I was getting tired of it. So I stopped and measured. I used 2.25mm (US #1) needles. I usually use 2.0mm (US #0) needles for fingering weight yarn, but all my gajillion sets of 2.0mm dpns are deeply involved in other projects.

Stitches per Inch: 6.5
Rows per Inch : 14



This stitch pattern really sucks up the row gauge. I'm hoping that will translate into very warm mittens.

I have no idea what the stitch pattern is called. If you know the name, let me know in the comments! It's a 4 round repeat:

Round 1: With MC (in my case the recycled gray sock yarn) *knit into the stitch below, k1* repeat from * to * for the entire round
Round 2: With CC1 (various warm Phat Fiber Samples) purl
Round 3: With MC *k1, knit into the stitch below* repeat from * to * for the entire round
Round 4: With CC2 (various cool Phat Fiber Samples) purl


Before we begin with the cuff...

step 1: what type of cast-on
Have you decided on what cast on to use? When I make mittens it's usually a case of my-hands-are-so-cold-I-need-mittens-right-now. I've only done a tubular cast-on once, and that was on something I frogged, although not because of the cast-on. So I'd find it takes me a lot of mental power to do a tubular cast on when I want the knitted object NOW. But I do want the cast on to be stretchy, so I use a long tail cast-on, using a needle approximately 3 times the diameter of the needles I'll use for the mitten.

step 2: ribbing decisions
Have you decided on ribbing? I love the way a K1tbl,P1 ribbing looks, although I find K1,P1 to hug my wrist a little bit tighter. Strange, I've always thought. I would have guessed that the twisted knit ribbing would be more elastic, but it seems to stretch out more quickly, although that may be due to a number of factors. I haven't been all that scientific about it. My twisted knit ribbed mittens are made of different yarn that the other pairs I wear and I also wear them more often, so don't take my observations as fact. I like K2P2 ribbing too, but like the knitting rhythm of K1P1 better. So when I want mittens fast, K1P1 it is!

step 3: how many stitches
Finally we are ready to figure out how many stitches to cast on.
If your stitch pattern is heavily cabled or pulls stitches together like cables would, you will want to base your cast-on sts on a stockinette stitch swatch. Just remember to make some increases after the cuff, so that you'll have enough stitches once you begin your cabling. Look back at your sketch where you recorded your measurements. Or you can use my measurements from yesterday - I'd love it if you knit me mittens! Take measurement #1, Hand Diameter, and multiply it by your stitches per inch. For the stitch pattern and needles I'm using, I get 6.5 stitches per inch. So I will cast on:

8.25inches x 6.5sts/inch = 53.625 sts

Obviously it will be pretty tough to cast on 53.625sts, so I round up to the nearest even number for K1P1 ribbing. If your making K2P2 ribbing, make sure you can divide your number by 4. If we rounded this up to 54sts, it would work for K1P1 but you'd need to cast on 56sts for K2P2 ribbing.

How many will you cast on?

________________x_____________=___________
#1 Hand Diameter___Your sts/inch___Cast-on sts

Round up to the nearest even number and you're ready for some K1P1 ribbing!

Make your cuff as long as you like cuffs to be. For me that's 3 inches.

Once I have two cuffs that measure 3 inches from the cast on edge, I'll post "Generic Mittens: From Wrist to Thumb".

Generic Mittens - Getting Started

One of the comments to my Olympic Mini Mittens offers a pattern for sale for adult sized Olympic Mittens. I kind of prefer the one's for sale at HBC and Zellers: something about the color work in that pattern just doesn't have the detail that is my personal preference. I think if I were to make a pair of Olympic Red Mittens for myself, I'd probably embroider the rings and slap on a felt maple leaf as I did for the Minis. I just like the look better. That, and I have never really felt the need to buy a mitten pattern. A want perhaps - Eunny's Anemoi's for example, but then they are some pretty, special mittens. I usually just wing it with the generic mitten pattern that I found bouncing around in my brain. For those of you who weren't born with mitten patterns ricocheting of the inside of your skulls, I thought I'd share my process. Because it really is more of a process than a pattern for me.

step 1: pick your yarn
I've used fingering weight sock yarn, sport weight yarn, worsted weight yarn, handspun, bulky weight yarn. If you like it, use it. The only thing I try to stay away from are yarns that will pill too quickly.

step 2: choose your needles
Check the ball band for your chosen yarn. Note the needle size suggested. Go down a few sizes. I like my mittens to be a bit wind resistance. I use dpns for my mittens; if you prefer another method of knitting in the round, feel free to use that. When I use worsted weight yarn, I usually use US 3/3.25mm needles. For fingering weight: US 0/2.0mm needles.

step 3: knit a gauge swatch
I know, I know - I hate knitting gauge swatches too. But this will really help your mitten to fit your intended recipient. Cast on enough stitches to make a 4 inch wide square. Knit in your intended stitch pattern for 4 inches. For the most basic mitts, I usually use stockinette stitch. If you're already familiar with the gauge you'd get using your chosen yarn, the needles you decided on in Step 2, and the stitch pattern you intend to use, you can skip this step.

step 4: measure your row and stitch gauge
If you're printing these instructions out, grab a pencil and record your measurements here.

Stitches per Inch: ________ Rows per Inch : ________

step 5: trace your hand
Use the back of your printout if you'd like to have everything in one place.



step 6: measure your hand
Note the spots on my hand sketch above. Use a tape measure and record your (or the recipient's) measurements on the same spots of your tracing.

My measurements are:
1: 8.25 inches
2: 3 inches - I like a long cuff!
3: 3 inches
4: 2.5 inches
5: 6.5 inches
6: 2.25 inches

Tomorrow, we cast on. A few things to think about before tomorrow...

What kind of cast on would you like to use? Tubular, long tail, knitted? How long do you like your cuffs? Do you prefer K1P1 ribbing, K2P2 ribbing, cabled ribbing, corrugated ribbing?

Mini Olympic Red Mittens

We are big Olympics fans here. Both kids asked Santa for Olympic Red mittens - as they were nearly impossible to find before Christmas. With the assistance of a special elf, Santa delivered and both kids found the red mittens in their stockings Christmas morning.
.

M recently asked me to make a pair for his bear, and these are the result. Quatchi was more than willing to pose, as Pooh bear is slightly embarrased by his exteme lack of fur.
.
If you'd like to make a pair of mini Olympic Red Mittens for yourself, the PDF is available as a free Ravelry download.
.
** download now**
.
.

.

Knitty - Winter 2009

I can finally show you the secret project that I used the Rowan Felted Tweed for!

.
Tentacular!
.
.
.
.

B and I had fun with a friend in a nearby park one day for the photos. I hope you all enjoy the pattern.

.

Thanks to Knitty for publishing this pattern that was so much fun to design and wear and to Rowan for supplying the Felted Tweed Aran.

.

No time to knit a Tentacular Scarf for your Christmas list? The prototypes are available in my Etsy shop.

Rowan Felted Tweed Aran scarf

Patons Classic Wool scarf

.

Poinsettia Ornament

This beautiful ornament is a great way to use up odds and ends of yarn. Wonderful as a decoration for a gift or to grace your Christmas tree.
.

.
This pattern is suitable for someone who can knit in the round on double pointed needles. Other skills required are increasing and decreasing, and seaming. In addition to the small amount (approx 30 yards) of fingering weight yarn, you will also need 12 gold beads, approximately 1/4” in diameter.
.
This pattern was developed for the November “Home for the Holidays” Phat Fiber box. It is also available through my Etsy shop (see the sidebar) or as a Ravelry download
.

.
This link will redirect you to Paypal through Ravelry's shopping basket
.

.

The Secret Project

I'm progressing on the "Secret Project". I'm about a quarter into the project. Do you see the papers in the lower left? That's were the WIP is sitting. Here's what I can show you:

.
.
It's knitted on dpns. There are already some ends woven in. And the yarn.
.

Now that I've knit a bit with the Rowan Felted Tweed Aran I can give you my impressions of it. The dark grey "Soot" is considerably softer than the light grey "Dusty" and the "Cassis". The yarn definately feels felted, but the plies still separate easily enough. It's easy to break my yarn without scissors when it's time to change colors. I like that! I have a serious problem finding scissors in my house. This yarn retails for about $12 in Canada, and that is probably the biggest deterent I would have in purchasing this yarn. I'm thrifty when it comes to my hobbies. But if anyone wanted to give me more of this again, I certainly would accept it gladly and enjoy knitting with it again.

.

"Crying Over You" - Pattern now Available

The newest PogKnits pattern is now available! Initially an exclusive for Phat Fiber members, it is now available for sale for everyone!
.

These onions knit up quickly in worsted weight wool. This will be a fun project if you can knit in the round, make I-cord, increase and decrease, and seam. Visit my Etsy store or download it now from Ravelry.
.

.
This link will redirect you to Paypal through Ravelry's shopping cart.
.

.

New & New

I've put together a new pattern. I think it's unique, fun and exciting and I can't show it to you.
.
Yet.
.
I have new yarn. It is a gift, of sorts. I think it's new this year to Rowan - Felted Tweed Aran. It also comes in a DK weight and a bulky weight.
.
.

It will be used to knit the new pattern. So while I knit on the pattern that I can't show you with the yummy yarn I've never used before, I won't be able to show you any work-in-progress shots.
.

Not until December 9th!
.

Approved

Here is Simon the Cyclops, just as B envisioned him. I'm quite pleased with how he looks. B was so right about the pointed toes - they really do add something. I love his stripy leggings too.

.
.

But I think my favorite part is how well his eye turned out. I used a small piece of white felt and glued it to his body using fabric glue. Then I poked a safety eye through both the felt and the knitted fabric and snapped it in place. Sometimes I feel using felt pieces to make the facial details is a bit of a cheat on a knitted toy, but I love how it looks and know I could never make it look as darling with embroidery.

.

I'll be writing up the pattern and making him available for purchase in my etsy shop and on Ravelry soon.

.

Now with No Legs

I finished some adorable pointy toed shoes for Simon, ripped off the old unapproved shoe and sewed the legs to his body. Apparently the legs were too long. So now Simon has shoes, but no legs. My co-designer is certainly determined in her vision for this toy!

.

.

She INSISTS on pointed toes

Apparently my idea of not making the blue pointy toes for Simon the Cyclops has not met with B's approval. When you are twelve and love shoes to the point that you frequently have at least 5 pairs at the front door, the footwear of the monster you are co-designing with your mother really matters!

.

.

Here's some legs - with a blue shoe that will be frogged!

.

Cyclopsish

I was shopping with B on the weekend and we saw some really cute stickers. One was of an adorable alien/monster and she said, "You could knit me that!" So I took a picture on my cell phone so I could remember the look for inspiration. Funny how she has such faith in my ability to turn a 7cm tall two-dimensional sticker into a cuddly 3D companion!

.

.
So here's what I have so far.

.

.

I don't think I'm going to go with sparkly pointed toes. Blue feet, maybe, but not pointy! And I think I want my little guy to look a bit more happy.

.